Archive for November 2008

Get a grip!

Posted by on November 13th 2008 in Shiny new kit
Tags:

More stuff to try out. Not the most hi-tech bits of kit, but light (106g a pair), simple to use and at £7.90 a pair they're way cheaper than the alternatives available from Petzl and the like. I was so tempted to nab some of the cheap snowshoes at the same time, but managed to resist.

 

 

Bob’s Honey Stove – first test

Posted by on November 13th 2008 in My reviews, Shiny new kit
Tags:

OK, I found the last of the meths. Only 18ml, but it was more than enough to get the steel glowing and to provide sufficient raging flames to boil 0.5l of water in 3 minutes. I just let it rip, not bothering with the simmering ring, so a lot of heat was lost up the side of the mug, hence I'm fairly convinced that I could have been a fair bit more fuel-efficient. Here it is, sooting-up my nice shiny mug:

 

So, apart from the boil-time, what other info did you get? First, I can confirm the information provided in the instruction leaflet - the panels do warp when heated, but they do go flat again after they've cooled.  Even when warped, the top grill stayed in place. Second, in the temperate climate of my kitchen, the panels cooled sufficiently to allow handling within 2 minutes. Third, the tea's going down rather well 🙂

So, do you like it? Yes, very much. It's well-made, simple to use and very versatile. There's nothing to compare it with, as there's nothing quite like it on the market at the moment. I reckon Bob's onto a winner here.

Any more thoughts? Well, I've never had any need to take a shaving-mirror into the hills, but I'm sure that one of the nice shiny side-panels would suffice. Who knows, in dire emergency you could use one as a signalling-mirror. Oh, and those rows of holes in the side panels - they're ideally-placed for fitting a hanging-kit. I'll test the stove in a different fuel-mode as soon as I can spare the time.

Bob’s Honey Stove – first mods

Posted by on November 13th 2008 in My reviews, Shiny new kit
Tags:

Right, before we start, I just want to say that these mods weren't necessary - it's just that I like to tinker with things to make them fit in with my personal intended use, and that use doesn't necessarily align with the intended modus operandi for the equipment. The unadulterated stove is clearly capable of being used with a Trangia™ burner, Bob's demonstrated that on his site, but I wanted it to work in a different manner, so I went out on a limb and did what I felt was in the best interests of what I wanted to achieve.

Anyway, I've wielded the tinsnips and the file, and now Podcast Bob’s new Honey Stove has been adjusted to suit my needs. Here's a summary of my mods:

What’s changed? I've notched the door panel and two of the five side panels as per the following pic:

Why? To allow the top grill to be removed without taking the sides apart. It can be lifted off quite easily, even when hot if you use a pan-grabber. The top grill had to be modded too.

Tell me more! In order to allow the top grill to sit inside the walls, I snipped off two of the five tabs, it now looks like this:

Will it still fit into the slots as per the original design? Yes, but with only three tabs it'll only lock into three slots. But you guessed that already, didn't you?

So, does it work? Yes. Remove the top grill and it's easy to access the Trangia™ burner'. Replace the top grill and it supports the mug. The top edge of the stove is still capable of supporting pans, and I've not altered the bottom edge.

Are there any other benefits? Well, the weight's been reduced by a massive 4g. OK, it's not much, but it means that I don't have to saw the handle off my toothbrush.

What next? It's time for a brew, if I can find the meths.

Bob’s Honey Stove – first thoughts

Posted by on November 12th 2008 in My reviews, Shiny new kit
Tags:
Podcast Bob's been kind enough to let a select group of folk have test-samples of his new Honey Stove, and I'm one of the lucky ones. These are my first thoughts, and the results of my first attempt at testing it. What's in the kit? A set of interlocking flat stainless-steel panels, comprising six side-panels (one of which has an aperture for accessing the interior), three grill panels (top, middle and bottom), a foil ash-tray, a cloth pouch and an A4 instruction sheet. How much does it all weigh? The stove panels add up to 356g, the ash-tray is 10g and the pouch is 44g. How much pack-space does it take up? Packed in the pouch provided, it's roughly 200mm x 140mm x 10mm. And when it's assembled? 125mm high, 125mm A/F. What's it look like? A bit like this:

Is it fiddly to assemble? Not really, I just slotted together the five standard side bits and held then in an open arc while slotting in the three grill panels. After that, I just slotted in the front panel to lock it all together. It takes 2 minutes tops, but I'd imagine that after it's been bent and dented a bit it would take a bit longer. If you can't figure it out, give it to some primary-school kids and be prepared to be embarrassed. What about stability? Very good on a flat surface, not a hint of it wanting to come apart. So, what fuels will this baby burn? It's primarily a wood-burner, but it's said to be versatile enough to work with a veritable plethora of fuels, see the product description for more details. What's the difference between the three grill panels? The bottom one has small vent-holes and is primarily for supporting sticks etc. when using it as a wood-burner, but can be used for other solid fuels. The top one is a pan/mug support, so has plenty of holes to let the heat get through. The middle one is similar to the top one, but has the central section removed to allow a Trangia™ burner to sit inside. The three grill panels are interchangeable, as they each use that same tab/slot fitting. It's possible to get away with using just one grill panel if you wanted to go all minimalist, but if that sort of thing floats yer boat I suspect that you'll already have other options in your kit-stash. This stove is aimed at versatility rather than speciality. That sixth side panel - does the aperture have to be at the bottom? No, just build the thing upside-down and you'll end up with the aperture at the top. What about cleaning it? Eh? You clean your kit? Oh dear! Seriously, a wipe with a damp rag or through some wet grass ought to suffice. Of course, you'll have let it cool first, won't you? So, what about that first test? I wanted to try it with my Trangia™ burner and Alpkit MytiMug, so I set it up like this:

So, how did it go? Not well. The front aperture's nowhere near big enough to admit the Trangia™ burner.  Bob's site has pics and a video where the burner's been put in from the top, and where the top grill is omitted. Fine for pans and large pots which would sit on the top edges of the side-panels, but a mug needs a support. I suppose the mug could be supported by two tent-pegs passed through some of the holes along the top edge, but I'm not in the habit of carrying extra pegs as part of a stove kit. The way around it might be to build the stove around the burner, but that's a faff which throws up more hard choices - sealing-cap off and risk spilling the meths, or sealing-cap on and be unable to reach in to take it off. Either way, if you want to use the Trangia™ simmer-ring, you'd be hard-pressed to access it through the aperture and you'd be at risk of getting blistered fingers.

What next? I was going to try it as a wood-burner next, but I want to get the Trangia™ issues sorted first.  Looks like my chosen test combi is a no-no at the moment. I'll post again when there's progress. Now, who's 'alf-inched me tinsnips?

Remembrance

Posted by on November 11th 2008 in Rambling on...
Tags:

For a small village, the turnout for Sunday's Remembrance Day Service was impressive. The gathered parade participants marched with a mixture of pride and sorrow through the old centre of the village to the Memorial Garden, where a band played and the crowd gathered.

A local Minister gave a moving service which brought tears to many eyes, mine included. Remembered were not just the casualties and fatalities of the two World Wars and the many other conflicts since 1914, but also the broken lives of the families that lost loved ones, and the survivors, many of whom bore or will bear the physical and often mental scars of conflict to the ends of their days. All of the Services were remembered, military and civilian.

Looking around the many ex-Servicemen and ex-Servicewomen present, I lost count of the number of different insignia, but I noted a significant number of Paras, Royal Artillery, Royal Marines and at least one from the Special Air Service. Sobering stuff. Enough to make me think twice about the elderly folk I meet around the village in the course of a normal week.

I didn't take any pictures at the ceremony, as it would have been disrespectful, but I'll go back to the Memorial Garden in a few days to get a photo for Anna to remember the occasion. She did a fine job of bearing the Standard for her Brownie pack in the leading group of the parade. We are very proud of her.

 

 

Die, Fledermaus

Posted by on November 10th 2008 in Rambling on...
Tags: ,

Take one pack of bread-mix, a selection of cheeses, some bacon, some peperoni, some tomato, a wing of bat, one school cookery lesson and one teenager with bit of imagination, mix together, cook for a bit and this is what you get: